Introduction of audio adjustments, Using balance adjustment, Audio adjustments – Pioneer AVH-P6600DVD User Manual

Page 66

Introduction of audio

adjustments

1 Audio display

Shows the audio function names.

Important

If the multi-channel processor (DEQ-P8000) is
connected to this unit, the audio function will be
changed into the multi-channel processors
audio menu. For details, refer to Introduction of
DSP adjustments on page 72.

% Touch A.MENU and then touch AUDIO

to display the audio function names.

The audio function names are displayed and

operable ones are highlighted.

# When A.MENU is not displayed, you can dis-
play it by touching the screen.
# You can also display MENU by clicking the
joystick.
# To go to the next group of function names,
touch NEXT.
# To return to the previous group of function
names, touch PREV.
# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
BASS and TREBLE.
# Only when the subwoofer controller setting is
FULL, NON FADING will be displayed instead of
SUB WOOFER. (Refer to Setting the rear output
and subwoofer controller on page 89.)

# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the previous display, touch BACK.
# To return to the display of each source, touch
ESC.

Note

If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Using balance adjustment

You can select a fader/balance setting that

provides an ideal listening environment in all

occupied seats.

1 Touch A.MENU and AUDIO and then

touch FADER/BALANCE.

# When the rear output setting is SUB. W,
BALANCE will be displayed instead of
FADER/BALANCE. Refer to Setting the rear out-
put and subwoofer controller on page 89.

2 Touch a or b to adjust front/rear

speaker balance.

Each time you touch a or b it moves the

front/rear speaker balance towards the front or

the rear.

FRONT:15 REAR:15 is displayed as the front/

rear speaker balance moves from front to rear.

# FR:00 is the proper setting when only two
speakers are used.
# When the rear output setting is SUB. W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 89.

Audio Adjustments

Section