Philips VR620/58 - Manual (Page 59)

55
Using your video recorder remote control
with your TV set
With the enclosed multicode remote control you can control the main functions of your TV set.
To do this, you must first enter a code number that corresponds to the make of your TV set.
You will find a summary of all available remote control commands on the last page of this
manual.
1
Hold down the TV y button.
2
Using the number buttons 0..9 , enter the code number that
corresponds to the make (manufacturer) of your TV set.
When you have entered the code number correctly, the TV set will
switch off.
aMy TV set will not switch off
b Also try to enter code numbers of other manufacturers.
b In some cases, it is possible that your TV set will not react to the selected
code numbers. If this is the case, you unfortunately cannot use this
function.
3
By using the TV buttons on the panel in the middle of the control,
you can:
qS increase the TV volume
Sr decrease the TV volume
TV y switch off sound
TV m switch off the TV set
qTV next programme number
TV r previous programme number
ENGLISH
Other functions