Philips VR620/58 - Manual (Page 38)

34
H
Manual recording
General information
Use 'Manual Recording' to make a spontaneous recording (for example, a programme currently
being shown).
If you want to start and stop a recording manually, read the section 'Recording without
automatic switch off'.
If you want to start a recording manually but have it stopped automatically, read the section
'Recording with automatic switch off'. (e.g. not to record to the end of the tape)
Read the section 'Direct record' if you want to record a programme currently being shown.
Read the section 'Automatic recording from a satellite receiver', if you want a recording to
be controlled automatically by a satellite receiver.
Recording without automatic switch off
1
Insert a cassette.
Using 'Tape List'
To save a recording in the 'Tape List' or to use a 'Tape List' cassette, enter
the cassette number using the number buttons
0..9 on the remote control.
The cassette is being checked. You can find more information on the 'Tape
List' in the chapter 'Tape List'. If you don't use the Tape List, interrupt with
STOP h .
BBC1
2
Use ;qP or P r= to select the programme number you want to
record, for example, 'P01'. This will appear on the display:
Station name
If a TV station transmits a station name, it will be shown in the display.
Programme numbers ' E1' 'E2'
This programme number is provided for recording from external sources (via
the scart socket
EXT.1 AV. 1 , EXT.2 AV. 2 ) .
Programme number ' E3'
This programme number is used for recording from the audio and video front
sockets.
Manual recording