Palsonic 76WSHD - Manual (Page 39)

6500K
9300K
14.1 Menu introduction
CONTRAST
BRIGHTNESS
H-SIZE
H-PHASE
V-SIZE
V-PHASE
PI N-BALANCE
PINCUSHION
TRAPEZOID
PARALLELOGRAM
H-MOIRE
V-MOIRE
ROTATION
RECALL
ENGLISH/CHINESE
Adjust the picture contrast.
Adjust the picture brightness.
Adjust the picture s horizontal size.
Adjust the horizontal position of the picture.
Adjust the pictures vertical size.
Adjust the vertical position of the picture.
Balance pincushion distortion.
Pincushion correction.
Correct the trapezoid distortion.
Adjust the angle between horizontal and vertical
Eliminate horizontal moire.
Eliminate vertical moire.
Rotate the current picture.
To restore to original factory preset mode.
English/Chinese menu on-screen display language
selection.
DEGAUSS Manually degauss the set
Adjust white balance R at current colour temperature
(red adjustment).
Adjust white balance G at current colour temperature
(green adjustment).
Restore the current picture s colour temperature to
9300K.
Restore the current pictures colour temperature to
6500K.
R
G
EXIT Exit the current OSD and store all the current
adjusted parameters.
Notes:
When the HD monitor gets signal from external equipment (such as Set top box, computer, DVD, etc. )
through XGA interface or YPbPr terminals, because of signal difference, the screen colour may not be
in optimum state, this time, you can adjust and item in the SCREEN ADJUST menu until you
get satisfying colour.
Using or can restore the value of and to default setting.