Palsonic 76WSHD - Manual (Page 11)

3.4 External Equipment connections
(Please refer to the owner's manual of the
equipment to be connected as well.)
3.4.1 To connect AV input terminals
You can connect video equipments such as a VTR and video camera to this TV and enjoy the high
quality picture and sound.
If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal
(special S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (phono type).
Video camera, etc.
Yellow (video)
White (audio L/MONO)
Red (audio R)
To select the input, press AV/TV button to display the signal source selection menu and press the CH
or CH button to select the corresponding input mode ( VIDEO 1 or VIDEO 2 or VIDEO 3) and press
VOL button to confirm.
Note on the S-VIDEO terminal
The S-VIDEO input terminal has priority over the AV1, AV2 VIDEO terminals on the rear and the AV3
VIDEO terminal on the side. To use equipment connected to the video terminals, disconnect any plug
from the S-VIDEO terminal.
To video output
To audio output
VTR without
S-VIDEO terminal VTR with
S-VIDEO terminal
To S-VIDEO
output terminal
To audio
outputs
To audio
outputs To video
outputs
TO ANT IN
THE SET'S REAR
Aerial output Aerial output