Paxar Monarch Pathfinder Ultra Gold - Manual (Page 158)

11-10 Editing a Format
Edit Format Name
>SHOE-SIZE _ _ _ _ _ _ _ _ _
Ï
6. Press g four times and type TAG. Press
Enter. The format name has been changed to
SHOE-TAG. You return to the Edit Header
menu.
NOTE: Duplicate names are not allowed.
- Edit Header Menu -
1. Change Menu Name
2. Edit MPCL Number
3. Edit Description
4. Change Length
5. Change Width
7. Press 4 to change the supply length.
Edit Length of
Supply (55 – 400)
>200 _
8. Press g three times and type 150. Press
Enter.
Warning: New Length
less than old length
Press a key to
continue. Or ESC to
Abort> _
9. Press Enter to continue. You return to the
Edit Header menu.
NOTE: If your format has fields defined that are
close to the non-print zones (top or bottom
of the label) and you change the supply
length, those fields may print off the label
(causing this warning).
- Edit Header Menu -
1. Change Menu Name
2. Edit MPCL Number
3. Edit Description
4. Change Length
5. Change Width
10. Press 5 to change the supply width.
Select Supply Width
1. 1.20 Inches
2. 1.5 Inches
3. 2.00 Inches
11. Press 2 to change the supply width to 1.50
inches, instead of 2.0 inches.
Warning: New Width
less than old width
Press a key to
continue. Or ESC to
Abort > _
12. Press Enter to continue. You return to the
Edit Header menu.
NOTE: If your format has fields defined that are
close to the non-print zones (edges of the
label) and you change the supply width,
those fields may print off the label
(causing this warning).