Panasonic Chip RC Networks EZADT - Manual (Page 5)

Chip RC Networks
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Frequency (Hz)
Attenuation
(dB)
Attenuation
(dB)
Frequency (Hz) Frequency (Hz)
Frequency (Hz)
Attenuation
(dB)
Attenuation
(dB)
1M 10M 100M 1G
0
10
20
30
40
50
60
70
80
0
10
20
30
40
50
1 M 10 M 100 M 1 G 3 G
100M 3G 1G 10M 1M 1M 10M 100M 1G 3G
0
10
20
30
40
50
10
0
–10
–20
–30
–40
–50
100 ȑ
/ 10 p
F 100
ȑ /
22 p
F
100 ȑ
/ 22 p
F 100 ȑ
/ 100
pF
100 ȑ
/ 47 p
F
1 kȑ /
330
pF
1 kȑ / 1000
pF
100
ȑ /
100
pF
100 ȑ
/ 22 p
F
100 ȑ
/ 47 pF
Measurement Circuit
~ ৎ 50 ȑ
50 ȑ
EZACT
EZADT
EZAST
EZASTB
EZANT
100
80
60
40
20
0
30 0 10 20 30 40 50 60 70 80 90
Ambient Temperature ( °C)
Rated
Load
(%)
70 °C
85 °C
20 10
■
Attenuation Characteristics
●EZACT
●EZST
• EZASTB
●EZADT
(1) For resistors operated in ambient temperature above 70 °C, rated power shall be derated. (“Power Derating Curve” is shown below)
(2) Rated Voltage for resistor shall be determined from
ǰRated Power҂Resistance Value, or Limiting Element Voltage (Max. Rated Continuous Working
Voltage) whichever less.
(3) In measuring at 1 MHz, Capacitance and Dissipation Factor are different.
■
Ratings
Power Derating Curve
For resistors operated in ambient temperatures above
70 °C, power rating shall be derated in accordance
with the fi gure on the right.
Item Specifi cation
Resistor
Resistance Values
10
ȑ to 100 kȑ
EZAC Standard : 10 ȑ, 22 ȑ, 47 ȑ, 100 ȑ, 220 ȑ, 470 ȑ, 1 kȑ
EZAD/S/N Standard : 22 ȑ, 47 ȑ, 100 ȑ, 220 ȑ, 470 ȑ, 1 kȑ
Resistance Tolerance ±5 %
Temperature Coeffi cient of Resistance (T.C.R.) ±200 ҂ 10 –6 /°C(ppm/°C)
Rated Power
EZAC : 0.031 W( <70 °C (1) )
EZAD/S/N : 0.063 W( <70 °C (1) )
Limiting Element Voltage (Maximum Rated Continuous Working Voltage) 25 V (2)
Capacitor
Capacitance Values
(25 °C, 1 kHz
(3) , 1 Vrms)
EZAC : 10 pF to 33 pF
Standard : 10 pF, 22 pF
EZAD : 10 pF to 100 pF
EZAS : 10 pF to 180 pF
Standard : 22 pF, 47 pF, 100 pF
EZAN : 220 pF to 1000 pF
Standard : 220 pF, 470 pF, 1000 pF
Capacitance Tolerance +30 %/–20 %
Capacitance Temperature Characteristics E Characteristic: +20 %/–55 %(–25 to +85 °C)
Dissipation Factor Less than 3 %(25, 1 kHz (3) , 1 Vrms)
Rated Voltage
EZAC, EZAD : 12 V
EZAS : 25 V
EZAN : 50 V
Category Temperature Range (Operating Temperature Range) –25 °C to +85 °C
●EZANT
Feb. 2006