P.86), Press the four-way controller ( 5 ) in a mode, Press the four-way controller ( 23 ) – Pentax Optio Z10 User Manual

Page 88: Press the 4 button, Manual focus

aking

Pictu

res

The procedure for setting the focus manually (\) is described below.

Press the four-way controller (5)

in A mode.

Use the four-way controller (5) to

select \ and press the 4 button.

The central portion of the image is
magnified to fill the screen of the LCD
monitor when focusing.

Press the four-way controller (23).

The \ indicator appears on the LCD
monitor to indicate the approximate
distance to the subject. Use the four-way
controller (23) to adjust the focus using
the indicator as a guide.
2

: for distant focus

: for closer focus

Press the 4 button.

The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed five seconds after you remove
your finger from the four-way controller (5).
After the focus is fixed, you can press the four-way controller (5) again
to display the \ bar and readjust the focus.

• In 9 mode, you can only select =, 3 and q.

• If you select something other than,3 or s for the focus mode when

shooting with C the sound of the camera focusing may be audible

in the recorded sound, depending on the shooting environment.

• When shooting with = selected, if the subject is closer than 40 cm,

the camera automatically focuses from 8 cm (when the focus limit is

off).

• When shooting with q selected, if the subject is further than 50 cm

away, the camera automatically focuses to infinity (when the focus

limit is off).

Saving the Focus Mode 1p.105

Manual Focus

To switch from \ to another focus mode, press the four-way

controller (5) while the \ bar is displayed.

Capture mode and drive mode cannot be changed while the \ bar

is displayed.

F o c u s M o d e

M a n u a l F o c u s

O K

MENU

C a n c e l

MENU

C a n c e l

MENU

C a n c e l

MENU

C a n c e l

MENU

C a n c e l

MENU

indicator