Pentax Optio Z10 - Manual (Page 171)

169
8
Settings
8
Press the 4 button twice.
The screen returns to the [W Setting] menu.
Check that [Alarm] is set to O (On).
9
Press the 4 button.
[Alarm is set] appears and the camera turns
off.
1
Use the four-way controller (23) to select [Alarm] on
the [W Setting] menu.
Check that [Alarm] is set to O (On).
2
Press the four-way controller (5).
The Alarm screen appears.
Check the alarm frequency and time.
3
Press the 3 button twice.
The camera returns to capture status.
The Clock mode screen appears and the alarm
rings for one minute when the set time is
reached while the camera is turned off.
You can stop the alarm by pressing any button
on the camera while the alarm is ringing.
Checking the Alarm
Turning the Alarm Off
The alarm will not ring if the camera is on when the set time is
reached.
Setting
Format
Sound
0 1 / 0 1 / 2 0 0 7 Date Adjust
Alarm
World Time
MENU ⚳ੌ ⚳ੌ Exit
1 / 3
A l a r m 1 4 : 2 5
MENU C a n c e l OK O K
A l a r m O n c e
Ti m e 1 7 : 3 0