Clock setting, Initial time, Selecting the clock display – Panasonic CQ-2130U User Manual

Page 7: Time reset, Time setting, Hours minutes

CQ-2130U

CLK

ALM

PRG

LOUD

APM

BAND

PWR

VOL

SEL

CQ-2130U

PUSH

BASS/TREB

BAL/FADER

MUTE

SCAN

TUNE

SEEK

ILL

CLK

TUNE

SEEK

Clock Setting

The 12-hour system is used for the clock.

Initial Time

“SET” is displayed when the clock is not adjusted.

Selecting the Clock Display

Press [CLK] (clock) to switch clock and alarm time
display both.

Note: if no operation takes place for more than 5 sec-

onds in alarm time, the display returns to the
clock display.

[}] (Minutes)

[{] (Hours)

Time Setting

Time Reset

When you want to reset the time, repeat steps

q to

Note: the current time will be displayed at all the

time even the power of the radio is turned off.

q Press and hold [CLK] (clock) and do not release

to set time. Display blinks and the time setting
mode is activated.

w Press [{] to set the hour.

e Press [}] to set the minute.

r Once the time has been set, release [CLK].

Note: Press and hold [{] or [}] to change num-

bers rapidly.

(blink.)

(Hours set.)

(Minutes set.)

(End.)

clock display

Alarm time display

Hours

Minutes