Additional information, Names and functions – Pentax EL-100 User Manual
Page 23
22
(Menu Button)
The Menu button is only active in CAPTURE
and PLAY modes. Press the Menu button to
turn on the Capture/Play menus. To access
the Capture/Play menus, simply switch the
Operating Mode Dial to CAPTURE/PLAY
modes and then press the menu button. To
turn off the menu, press the menu button again.
OK Button
The OK button is active any time a menu or
dialog is displayed. Use the button to select/
confirm the currently highlighted item.
Power Button
Press the power button to turn on/off the
camera. While the camera is powered on and
t h e r e i s n o b u t t o n a c t i v i t y o r H o s t
communication for about 90 seconds, the
camera will automatically turn itself off to
conserve battery power (standby) meanwhile
press any button or rotate the Operating Mode
Dial will bring the camera back immediately. If
there is no any activity for 3 minutes, the sys-
tem power will be off and you will have to press
the power button to turn it on.
Additional Information
Names and Functions
LCD Display
When you are about to take a picture, you may
use the LCD monitor to frame the image. Press
the Display button to turn on/off the LCD
monitor.
(Display Button)
The Display button is only active in CAPTURE
and PLAY modes. While in CAPTURE mode,
press the Display button will toggle the LCD
monitor On and Off. In PLAY mode, press the
Display button to review the images in the
following 3 modes:
1. Single image display.
2. Single image display with image information
overlay.
3. Multi-image (3x3 thumbnail) display.
4 . P r e s s t h e D I S P L AY b u t t o n u n t i l t h e
thumbnails screen appear. To select the
single image from the thumbnails screen,
frame the image by the arrow buttons
(
/
) and then press the DISPLAY button
again.