beautypg.com

How to set the osd (on-screen display) language, How to set the self-timer – Pentax EL-100 User Manual

Page 15

background image

14

3. Select the WHITE BALANCE item by the

arrow buttons (

/

) and then press the OK

button to confirm.

4. Use the arrow buttons (

/

) to select the

desired white balance setting.

5. Press the OK button again to make the

change. The cursor returns to the CAPTURE
MENU.

This setting is reset to AUTO when the camera power is

off.

How to set the OSD (On-Screen
Display) language?

To s e t t h e O S D l a n g u a g e , p e r f o r m t h e
following:
1. Set the Operating Mode Dial to SETUP.
2. The Setup menu appears.
3. Select the LANGUAGE item by the arrow

buttons (

/

) and then press the OK

button to confirm.

4. Use the arrow buttons (

/

) to select the

language.

5. Press the OK button again to make the

change. The cursor returns to the SETUP
MENU.

How to set the Self-Timer?

To use the Self-Timer function, perform the
following:

1. Set the Operating Mode Dial to CAPTURE

.

2. Press the Self-Timer button to set the

Self-Timer on.

appears on the status LCD.

3. Press the Shutter button.
4. After 10 seconds, an image is captured and

the timer will turn itself off.

The Self-Timer is located in front of the camera, and it is

designed to count down for 10 seconds. In the first 7
seconds, the indicator lights up and then blinks rapidly
for the last 3 seconds.

How to format the Internal
Memory or CF (CompactFlash)
card?

Perform the following procedures:
1. Set the Operating Mode Dial to SETUP.
2. Select the FORMAT CARD item by the

arrow buttons (

/

) and then press the OK

button to confirm.

3. Use the arrow buttons (

/

) to select

FORMAT.

4. Press the OK button again to re-format the

internal memory or CF card. The cursor
returns to the SETUP MENU.