Philips 19HFL3232D/10 - Manual (Page 25)

23
English
EN
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-T
digital broadcasts. With digital broadcasts, you
can select a subtitle language.
Enable subtitles on analogue TV
channels
1
Select an analogue TV channel.
2
Press TELETEXT.
3
Enter the three-digit page number of the
subtitle page with the Numeric buttons.
4
Press TELETEXT to switch off teletext.
5
Press SUBTITLE.
» The [Subtitle mode] menu appears.
6
Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
7
Press OK to enable subtitles.
8
Repeat this procedure to enable subtitles
on each analogue channel.
Tip
‡ Select [Subtitle mode] > [Off] to disable
subtitles.
Enable subtitles on digital TV channels
1
When watching digital channels, press
SUBTITLE.
» The [Subtitle mode] menu appears.
2
Select [On] to display subtitles always or
[On during mute] to display subtitles only
when audio is muted.
3
Press OK to enable subtitles.
Select a subtitle language on digital TV
channels
Note
‡ When you select a subtitle language on
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
1
Press
MENU.
2
Press to select [Setup] >
[Features] > [Subtitle language].
3
Press OK or to enter the list of
available languages.
4
Press to select a subtitle language.
5
Press OK WR FRQÀUP
Tip
‡ You can also access the [Subtitle language]
menu while watching TV by pressing
OPTIONS > [Subtitle language].