Philips 107B7 User Manual

Page 68

17” CDT Color Monitor 107B7

• Power on -

< 75w. (Test requirements refer to EN61000-3-2)

• Active off -

< 2w at 120Vac / 240Vac.

• Switch off -

< 2w at 120Vac / 240Vac.

2.6.3 Power saving conditions

The monitor enters DPM off mode when no H&V sync or one of H-sync / V-sync input is absent. No message
appears before entering DPM mode.

2.6.4 Power recovery from power saving

Both H-sync and V-sync are detected.

2.7 User Controls / Indicators / Connectors

2.7.1 Front controls

• OSD menu is accessed by the keypad.

Key (R to L)

Function

Power Tact

switch

Menu OSD

“ + ”

Brightness/Adjust increase/Menu selection

“ - ”

Contrast/Adjust decrease/Menu selection

High Brightness

HB 4 levels hot key selection

• Access main menu by pressing “MENU” key.

• Select function via “+/-” & “MENU” keys, increase/decrease via “+/-” keys.

• Brightness control -

Direct access only by hotkey.

• Contrast control -

Direct access only by hotkey.