Philips 107B7 - Manual (Page 63)

17” CDT Color Monitor 107B7
63
1.2 Product Range
CTV Destination
Mains
Cord
Magnetic
Field
Cabinet
Color
Ergonomics
OSD
Language
107B70/00 Europe European North Grey TCO'03 9
107B70/27 NAFTA US North Grey TCO'03 9
107B75/27 NAFTA US North Black TCO'03 9
2. Electrical Performance
All performance specifications are defined under “STANDARD TESTING CONDITIONS”, unless otherwise
specified.
2.1 Standard Testing Conditions
• Monitor facing to the east
• Warm up time - ≥ 30 min
• Ambient temperature - 25 ± 3 °C
• Prime mode - 1024x768@85Hz
• Color temperature - 9300 °K
• Video signal level - 700mVpp
• Brightness setting - 50% (set to near cutoff)
2.2 Video Signals
2.2.1 Video Input Signals
• Maximum pixel rate - 180 MHz.
• Sync input - TTL level, separate H/V sync only, “+” or “-“ polarity,
terminated with ≥ 2.2kΩ impedance.
• Horizontal frequency - 30 ~ 86 kHz.
• Horizontal sync width - 0.6 us minimum, 4 us maximum.
• Vertical frequency - 50 ~ 160 Hz.
• Vertical sync width - 2 lines minimum, 10 lines maximum.
• Analog RGB level - 0 ~ 700mV linear, positive polarity, terminated with 75 Ω ± 5%
impedance.
• Preset video modes - 8 preset modes. All visual performance has to fulfill the FOS
performance specifications. The user can recall the factory setting
in OSD menu.