Primera Technology BravoPro Automated Optical Disc Printing System - Manual (Page 39)

Note: If using the Black and Color Setting, be sure to perform the
Cartridge Alignment found in the Configuration Utility . Refer to
section 2-B for more details on this calibration.
• Print Quality
There are four options for image quality. Keep in mind that
Normal 600 provides the fastest print at lower quality
while Super Photo 2400 delivers the best quality at a
slower print speed.
• PrimaColor™
Click on this Check box to enable PrimaColor color
matching . The PrimaColor profiles were written
specifically for the Bravo to give a precise color match
when attempting to print photographic images. If you
are using a third-party color management system, disable
PrimaColor.
• Intensity
The Intensity setting will control the amount of ink
saturation on the disc. When printing onto the Primera
ToughCoat discs, 50% is usually sufficient. When printing
on to other brands of media, or if you would like to print
darker colors, you may wish to increase the Intensity
setting. Please note that higher ink saturation could result
in discs not drying instantly. Also, higher intensity will
result in higher ink usage causing a lower yield of discs
per cartridge.
• Inner Diameter
The inner diameter refers to the size of the non-printed
center on your disc. The size of the center hub can vary
from one type of media to the next. This allows you to set
the inner diameter in millimeters allowing you to print all
the way to the center hub regardless of the type of disc you
are using. For the discs that Primera sells, use the following
guide for Inner Diameter:
− 38.3 mm for Primera's ToughCoat CDR
− 24.9 mm for the Hockey Rink Disc, Business
Card Disc and 80mm CD
Printing Discs From Macintosh 35
510685.qxd 4/14/03 3:25 PM Page 35
TOC INDEX