Pioneer DVD-V7200 Industrial DVD Player RS-232C - Manual (Page 46)

PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual
- 38 -
*BARCODE_SRP #n : Barcode #n Search Pointer
Outline of Barcode Command : Barcode Command has these formats as follows.
DVD 4 digits command (Set the player, the video and the audio control)
DVD 6 digits command (Set the attribute control)
DVD 10 digits command (Chapter Search Command)
DVD 12 digits command (Chapter Segment Play Command)
DVD 14 digits command (Frame Search Command)
DVD 16 digits command (Segment Play Command)
LB compatible 4 digits command (Set the player, the video and the audio control)
LB compatible 6 digits command (Chapter Search Command)
LB compatible 8 digits command (Chapter Segment Play Command)
LB compatible 10 digits command (Frame Search and Time Search Command)
LB compatible 14 digits command (Frame segment Play and Time Segment Play)
LB compatible 16 digits command (Special Effect Frame Segment Play)
NOTE: Follows two command functions in Barcode / Command Stack are not
regulated in Barcode Format. So those are regulated as follows.
1) The mark of the end of group : The first byte is (ffH), the others are (00H).
2) REPEAT : (49a3H)
*Refer the details to the Barcode Format.
Format of Blackboard ; Picture data in the data :
The length of Blackboard ; PIcture data is 24 bytes. This is a fixed length.
Example : Displays the picture compulsively.
Title 02, from Frame 3600 to Frame 4800. And GROUP 01, UNIT 03, Rectangle: the
coordinates are (24, 36), (260, 200). Inside of the rectangle fills with blue.
BP Data Explanations
1216 + BARCODE_SRP #n 46H Means “F”, indicates the ID of Picture.
+ 1 04H (1) Display mode ; This is a Forced
display.
+ 2 02H The starting Title number
+ 3 00H The starting Address number (MSB)
+ 4 00H The starting Address number
+ 5 0eH The starting Address number
+ 6 10H The starting Address number (LSB)