Pioneer DVD-V7200 Industrial DVD Player RS-232C - Manual (Page 24)

PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual
- 16 -
completely stops, the player enters Park mode and returns the completed status
message.
If the command is sent while the player is in Park mode, the player enters Open mode
and it opens the tray.
Execution :
Command String Status Return DVD-V7200
RJ R Random Access mode
to Park mode
NOTE: Sending a second Eject command causes the player to open the tray.
5.4 Start
Function : Disc rotation starts
Format : SA
Explanation : If the command is sent while the player is in Open, Park or Reject
mode, the player immediately enters Setup mode and the disc begins rotating. The
player is ready for playback when the device reaches the beginning of the program
(DVD, CD or VCD disc pauses or stills at the first track). The player returns the
completed status when the disc pauses or stills.
If the player receives the command while playing a menu, the player returns an error
message. However, if the disc program does not allow new commands once
playback begins, the player ignores the command.
Execution :
Command String Status Return DVD-V7200
SA R Park mode to Pause mode
SA E11 Open mode to Park mode
Error – No disc in tray
5.5 Play
Function : Pictures and sound are reproduced (Option - Auto Stop)
Format : (Address)PL
Explanation : If the command is sent while the player is in Open, Park, or Reject
mode, a DVD disc plays according to the menu selection or from the first title in case
of no menu, and a CD/VCD disc plays from the first track. The player returns the
completed status message after the Play mode begins.