Pella Typical Wood Frame Construction 801U0102 - Manual (Page 5)

C. Apply top flashing tape. Cut a piece of
flashing tape long enough to go across the
TOP
B. Apply side flashing tape.
longer than the frame height of the window. Apply one piece
Note: DO NOT tape or seal the bottom nailing fin.
О
О
#
TO
LEAVES
Σ
#
onto the frame cladding, over the top fin onto the sheathing.
/N
&YUFSJPS О
О
О
D. Fold down top flap of water resistive barrier (3D).
E. Apply flashing tape to diagonal cuts. Cut pieces of
mASHING
Note: The top tape must overlap the tape
below it to divert water properly. Be sure
to overlap the top corners (3D).
О