Pella Typical Wood Frame Construction 801U0102 User Manual

Page 4

E. Plumb and square window.

0LACE

from the bottom and top of the window between
the window and the sides of the opening. Adjust
the shims as required to plumb and square the
window in the opening. If the frame height
EXCEEDS

Note: DO NOT shim above the
window or in the space between
the spacers at the bottom of the
window. DO NOT over shim.

У д О д

{ д x д

И д З д

'JYFE

&YUSVEFE'JO

F. Check the interior reveal. Make sure the

measurement from the interior face of the
window to the interior face of the wall is
equal at several points around the window.

Note: If the dimensions are not equal,
check to make sure the ﬁns are folded out
to 90˚ at all points.

EXTRUDED

A. Units that do not have pre-applied ﬁn corners:

!PPLY

INTEGRATING THE WINDOW TO

THE WATER RESISTIVE BARRIER

(

For ﬂexible ﬁn:

This allows for movement of building materials.

Note: Make sure all ﬁn corners are lying as ﬂat as possible.