PYLE Audio PLDVD170 - Manual (Page 29)

26
Radio operation
1.If no station can be received, " ----- " appears in the display for the empty channel.
2.If fewer than 5 stations can be received, the system will memorize as many
stations as possible, then playback starts from the first channel.
3. You can select Auto Travel Preset mode in FM F2(or F3) and LW A2
or [FM F1(or F3) and MW A1] band.
4.Press the number SEL button, you can adjust the sound of the radio.
When you are driving in an unfamiliar location and want to memorize local stations without
changing the standard preset stations(5 FM F2 and 5 LW A2).
A total 10 stations (5 FM F2 and 5 LW A2) can be programmed.
To set the stations ....see the [ the RADIO TUNING on page 25]
3 (Auto Travel Preset) operation
DVD/
RADIO
1 3 4 2
5
SCAN
Power on from the beginning regardless of the mode
(DVD, FM, MW,LW) where you power off.
Power on/off .
Switch between mode
and mode.
the radio
DVD player
In radio mode, select the desired
channel (ch1~ch5) with the number
button (1~5)directly
Start automatic tuning and play each receivable stations for several seconds
store the desired station by press the MEM button and favour number button .
In radio mode, Press the BAND button you change the current band to others in turn:
F1 F2 F3 A1 A2
In MW band, press SETUP button,
change to MW-530(10K), MW-531(9K)in turn. If the receiving range of your location is 531~1710K(Hz)
tuning step is 9K(Hz). If the range is 530~1710K,the step is 10K. If you are not sure the range of your
location, and you can not receive station in current range, try the other range.
1)In radio mode
2)To quickly scan up or down in frequency, press the SEEK button Release the button
and the display approaches the desired frequency automatically .
3) store the desired station by press the MEM button and favour number button
1)In radio mode
2)To select frequency finely, press the SKIP button. Each time you press the button the
frequency tune up or down in frequency.
3) store the desired station by press the MEM button and favour number button
Store the current station
Remote control operation
The button
on the remote Press the button on the remote
Select the audio functions: bass, treble, balance, fader, loudness
4 Adjusting the volume
Turn up or down the volume with the button VOL+, VOL-.
Turn up or down the volume
POWER
BAND