PYLE Audio PLDVD170 - Manual (Page 14)

MP3
Basic playback
DVD VCD CD
11
Playing a disc
This section shows you the basics on how to play a disc.
To obtain a higher quality picture
About
Occasionally, some picture noise not usually visible during a normal broadcast may appear on the
monitor screen while playing a DVD disc. This distortion is because the high resolution picture
depends on the monitor you use with this DVD player. You should generally reduce the sharpness
adjustment on your monitor when viewing DVD discs.
The icons on the heading bar show the playable discs for the functions
described under that heading.
:You can use this function with DVD discs.
:You can use this function with VIDEO CDs.
:You can use this function with CDs .
:You can use this function with MP3 discs .
3.
Press button
The DVD player ejects the disc automatically.
Press button again the disc goes into the slot automatically.
Press the OPEN button to open the door.
2.
Place the disc (with the playback side down) into the disc slot
Place the disc in the slot, the disc will go into the slot automatically. Do not push the disc into the
slot fast, doing so may cause the loader to malfunction.
Press the OPEN button to open the door.
The disc spins and playback starts.
If you insert a DVD disc that contains a title menu, or insert a PBC - equipped VIDEO CD,
a menu screen may appear.
--To start playback of a PBC- equipped VIDEO CD from the menu screen,
set"PBC" to on" via the on-screen displays with MENU button.
--To start playback of a DVD disc from the menu screen,
press the TITLE or MENU button ( depending on the actual DVD discs.)
"
DVD
DVD
DVD
VCD MP3
MP3
VCD
VCD
CD
CD
MP3
CD
Preparations
When you want to view a disc, turn on the monitor and select the video input connected to the
DVD player.
When you want to enjoy the sound of discs from the audio system, turn on the audio system and
select the input connected to the DVD player.
For connection details, see"Connections".
note: Do not put any objects other than discs into the disc slot, doing so may cause the player
to malfunction.
1. Press PWR on the front panel or POWER on the remote
The DVD player turns on