Philips VPA115PR - Manual (Page 5)

Before Using Your VCP 5
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the bottom of the
remote control by sliding the lid in the direction of the arrow.
2
Insert two AA batteries inside the battery compartment
with their + and – ends aligned as indicated.
3
Replace the battery compartment lid.
Using the Remote Control
● Point the remote control at the VCP’s remote sensor when
operating the VCP.
● Do not put objects between the remote control and the VCP.
• The remote control and its batteries
are supplied.
• Do not mix alkaline and man-
ganese batteries.
• Do not mix old and new batteries.
Helpful Hints
1
2
3
● Use only tapes with the mark.
● Remove any light adhesive stick-on notes from the video cas-
sette tape before putting the tape in the VCP. Removable labels
can jam the VCP.
● Periodic maintenance is required to maintain your VCP’s excel-
lent performance. This VCP has an Automatic Head Cleaner.
However, the video heads will require replacement eventually.
Only an authorized service center should perform this service.
VCR Maintenance
Cassette type/Playback Time
Tape Speed T160 T120 T60
SP (standard play) 2 hrs.
2 hrs. 1 hr.
40 mins.
LP (long play) 5 hrs.
4 hrs. 2 hrs.
20 mins.
SLP (super long play)
8 hrs. 6 hrs. 3 hrs.
The chart below shows the playback time for three types of video
cassettes (T160, T120, and T60). There are three playback speeds:
SP, LP, and SLP.
Types of Video Cassette Tapes