Philips LX7500R/04 - Manual (Page 46)

In the system menu the following menus are available:
– t Picture
– u Language
– w Features
– x Remote control settings
– s Disc features
– z Record settings
– y Installation
In the menu y Installation, you can
– do all settings for the TV channels on your DVD
recorder system (add, sort and delete TV channels, set
which TV channel should be decoded with a decoder,
etc.),
– set the time/date,
– set to which socket you connected additional
equipment, and
– do some speaker settings.
t Picture
1 Press and hold DVD/MON for 1 second.
2 Press SYSTEM MENU.
3 Press
1 as often as necessary to select A.
4 Press
4 or 3 as often as necessary to select t Picture.
Next, press
2 to confirm.
5 Press
4, 3 as often as necessary to select the desired
function. Next, press
2 to confirm.
6 Press
4, 3 as often as necessary to select the desired
setting.You can choose as follows:
TV shape
The picture signal from your DVD recorder system can be
set to match your TV screen. This setting will have an effect
only with DVDs supporting different screen formats.
➜ 4:3 letterbox: for a wide-screen picture with black bars
at the top and on the bottom
➜ 4:3 panscan: for a full-height picture with the sides
trimmed
➜ 16:9: for a wide-screen TV set (screen edge ratio 16:9)
Horizontal video shift
You can move the TV picture to the left or to the right to
suit your TV screen. Use
1 or 2 for adjustment.
System settings
46
English
A B C D E F G
2 17 off off no off
t
u
w
x
Picture
TV shape 4:3 letterbox
Horizontal video shift
Video output RGB + CVBS
Component video output Interlaced
Black level shift Off