Pitco Frialator Solstice I12 Water Cooker (Operations Manual) User Manual
Page 3
Solstice I12 Cooking Computer Service
Part # 60153301
L20-316 Rev 0
3
1
Key Locations and Functions:
ID Keys
Displays show current operation. Throughout this text, a left or right only display reference
will be printed as [SHRIMP9]. When both left and right displays should be interpreted
together, this text will show them as [6C 10:28] [SHRIMP9].
Indicators
Heat Demand
Thermometer
Key
Indicators
Key
Program
Key
Key
Product
Name
Remaining
Time
Location
Cook
12 Location
Keys
FRONT
OOK
C
BACK
1.1
To turn the appliance ON:
If power is applied to the appliance, the displays will show [OFF]. Press the [I/O] key.
Displays will show one of the normal displays: [HEATING], [READY], or an alternating
display when filling: [FILLING ]<>[HEATING]. Some messages may show in both left and
right displays. Wait for the appliance to heat up to the [READY] condition before cooking.
1.2
To turn the appliance OFF:
Press the [I/O] key. Display will momentarily show the software version number and then
display [OFF].
1.3
To start a Cook:
When the display is showing [READY], the appliance has reached set temperature and is ready to
cook. To start a cook, press the Cook key
OOK
, followed by the Product key
SHRIMP
. The display
will show [
Press any key that is lit
and place the bag in that rack location. The indicator above the key will
flash to indicate the cook timer is running.
In the example above, the cook key
OOK
was pressed, then the shrimp key
SHRIMP
, followed by the
location 6 key
. Displays then shows that SHRIMP is cooking with 10 minutes and 28 seconds
remaining at location 6; [6C 10:28] [SHRIMP9 ].
Multiple cooks may run together. While cooks are running, the displays will always show the cook with
the least time remaining. Longer running cooks will flash their indicators at a slower rate. Time
remaining on any location may be checked by momentarily pressing
, and a key with a flashing