Panasonic SC-EN53 - Manual (Page 12)

Timer operations
RQT6734
12
To cancel the timer
Press [TIMER ON/OFF] to clear the timer indicator from the display.
The timer comes on at the set time everyday if the timer is on.
To change the settings (when the unit is on)
To change the play times
Do steps 1, 2, 3 and 5.
To change the source or volume
1. Press [TIMER ON/OFF] to clear the timer indicator from the display.
2. Make changes to the source or volume.
3. Do steps 4 to 5.
To check the settings (when the unit is off)
Press [CLOCK/TIMER ADJ].
The settings are shown in the following order:
start time
→finish time→source→volume→current time
You can enjoy other sources after you have set the timer.
Turn the unit off before the timer’s start time.
Note
• If you turn the unit off and on again while a timer is functioning, the
finish time setting will not be activated.
• If the unit is on, the timer will not function. The unit must be in the
standby mode.
• If AUX is selected as the source, when the timer comes on, the
system turns on and engages AUX as the source. If you want to
playback from a connected unit, set that unit’s timer to the same
time. (See the connected unit’s instruction manual.)
Using the sleep timer
Remote control only
Set the unit to stop and turn off after a certain time.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
To cancel the sleep timer
Press [SLEEP] to select “OFF”.
To confirm the remaining time
(only while unit is ON)
Press [SLEEP].
The remaining time is shown for about 5 seconds.
To change the setting
Press [SLEEP] to select the new setting.
Note
The play and sleep timer can be used together.
The sleep timer always has priority. Be sure not to overlap timer
settings.
Using the play timer
Remote control only
The play timer can be set to on at a certain time to wake you up.
Preparations:
• Turn the unit on and set the clock (A page 11).
• Prepare the music source you want to listen to: CD, radio or aux,
and set the volume.
1 Press [CLOCK/TIMER ADJ] to select the timer function.
Every time you press the button:
ON TIME: to set the start time
OFF TIME: to set the finish time
Setting the start and finish times
2 During “ON TIME” display
(within 10 seconds or so)
1 Press [g g g g g/∂] or [µ/ f f f f f] to select the start time.
2 Press [CLOCK/TIMER ADJ].
3 During “OFF TIME” display
1 Press [g g g g g/∂] or [µ/ f f f f f] to select the finish time.
2 Press [CLOCK/TIMER ADJ].
The start and finish times are now set.
Turning the timer on
4 Press [TIMER ON/OFF] to display “r r r r rPLAY”
The settings are shown in the following order:
start time
→ finish time
(The indicator doesn’t appear if the clock hasn’t been set.)
5 Press [f f f f f] to turn the unit off.
The unit must be off for the timer to operate.
Play will start in the set condition at the set time with volume
increasing gradually to the set level.
Using the timers
CLOCK OFF TIME ON TIME
Previous display
SLEEP 90 SLEEP 120 SLEEP 60 SLEEP 30 OFF
AUX AUX TUNER/BAND TUNER/BAND
TUNING MODE TUNING MODE
EQ EQ LIVE VIRTUALIZER LIVE VIRTUALIZER PLAY MODE PLAY MODE
VOLUME VOLUME
DISP DISPLAY AY SLEEP SLEEP PGM/ PGM/–CLEAR CLEAR
CD CD
CL CLOCK CK
TIMER ADJ TIMER ADJ
TIMER TIMER
ON/OFF ON/OFF
4
5
11-12 SC-SC-EN5 P [En] 1/14/03, 3:30 PM 12