Philips CEM3000B - Manual (Page 20)

21
Connect external sound
source
1
Connect the external sound source to
MP3 LINK connector with a 3.5 mm
cable.
2
Press SOURCE repeatedly until [MP3
LINK] is displayed.
3
Operate the external component
(See the instructions supplied with the
external component).
Control music playback on iPod/
iPhone
1
Make sure that the iPod/iPhone is
connected correctly.
2
Press SOURCE to select iPod USB mode.
3
Press repeatedly to toggle between the
two control modes:
•
iPod control mode: Use the buttons/
touch screen on iPod/iPhone to
control the music.
• Audio control mode: Use the
control buttons on car audio to
control the music.
To control playback under audio control
mode:
To pause/resume play, press • .
To skip to a track, press • / .
To search during play, press and •
hold / , then release to resume
normal play.
To navigate the menu, press
• ,
rotate to select, then press to
confirm.
Search for a track on iPod/iPhone
1
Press SOURCE repeatedly to select iPod
mode.
2
Press BAND/ to browse iPod/iPhone
menu.
3
Rotate to select the artist search
mode, and press to confirm.
4
Press DISP/ to search alphabetically.
5
Rotate to select artist, then press to
confirm.
6
Rotate to select song in current album.
7
Press to start play.
Note
You cannot control the music via iPod/iPhone •
under audio control mode.
English
EN