Philips CEM3000B - Manual (Page 16)

17
signal is strong, then the audio will
fade in to the original volume level.
• [WEAK TO FM]: When the DAB
signal is weak, switch to the last
listened FM station. Switch back to
DAB when signal is strong.
DAB Dynamic Range Control
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
1
In DAB mode, press MENU to enter the
menu options.
2
Press / repeatedly until [DAB DRC]
is displayed.
3
Rotate to select an option.
• [DRC Off]: No compensation
applied. (the default)
• [DRC Low]: Medium compensation
applied.
• [DRC High]: Maximum compensation
applied.
Note
The best way to determine which of these DRC •
value settings suits you best is to experiment
with them on various source material.
DAB Antenna
1
In DAB mode, press MENU to enter the
menu options.
2
Press / repeatedly until DAB antenna
option is displayed.
3
Rotate to select an option.
Multiplex name: Displays the name •
of the DAB multiplex in which the
current station is broadcast.
Multiplex info: Displays the channel
•
and frequency of the current DAB
multiplex.
Program type: Describes the content
•
of the current DAB station.
Scrolling text: Information broadcast
•
by most DAB stations (may include
song titles, news, etc)
Signal Strength: Displays a meter
•
illustrating the strength of the DAB
signal 0-100.
Signal Quality: Display DAB signal
•
quality, from 0 to 100.
Tip
If any information above is selected, when •
you tune to another DAB station, you can
press OPTIONS/CLOCK once to display the
selected information, no need to scroll through
the list.
Weak DAB signal
Select the switch over option when DAB signal
is weak.
1
In the DAB mode, press MENU to enter
the menu options.
2
Press / repeatedly until [WEAK
DAB] is displayed.
3
Rotate to select an option.
• [WEAK MUTE]: When the DAB
signal is weak, fade out the DAB
audio and mute it until the DAB
English
EN