Planet Technology Wireless Access Point w/Bridge WAP-1963A - Manual (Page 16)

11
3.2.4 AP Bridge – Point to Point Mode
This mode can use to connect to another Bridge Mode WAP-1963A that the MAC Address is entered in
the setting. It can work as a bridge to connect two LANs in distant place.
Parameters Description
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings.
MAC Address Please enter the MAC Address of the WAP-1963A that you want to connect to.
Set Security Set a WEP Key to protect your wireless connection. It is support 64/128bit Key to
the WEP function. If you want to change WAP-1963A to other operate mode,
please disable this function before change operating mode. Please make sure the
WEP Key have set to another WAP-1963A is the same.