Panasonic SC-AK340 - Manual (Page 15)

15
RQT8043
RQTV0066
LANG - 5
LANG - 4
FRANÇAIS
DANSK
DEUTSCH
Sound adjustment
Selecting sound effects Selecting sound effects
Preset EQ Preset EQ
Press [PRESET EQ] repeatedly to select your desired
setting.
➞ HEAVY SOFT CLEAR ➞ VOCAL ➞
FLAT (off) HALL LIVE
➞ ➞
DISCO ➞
Setting Effect
HEAVY Adds punch to rock
SOFT For background music
CLEAR Clarifi es higher frequencies
VOCAL Adds gloss to vocal
DISCO Produces sound with the same kind of lengthy
reverberations heard at a disco
LIVE Makes vocals more alive
HALL Adds an expansiveness to the sound to produce the
atmosphere of a great concert hall
FLAT No effect
Enhancing the bass sound Enhancing the bass sound
You can enhance low-frequency sound so that heavy bass
sound can be heard clearly, even if the acoustics of your
room are not optimal.
To activate
Press [H.BASS].
To cancel
Press [H.BASS] again.
Note:
The actual effect depends on the disc.
Note:
• The play timer will start at the preset time with volume increasing
gradually to preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time everyday if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes on,
the system turns on and engages MUSIC PORT as the source. If
you wish to playback or record from the portable audio equipment,
just activate the equipment’s play mode and increase the volume.
(See the portable audio equipment’s instruction manual.)
Using the sleep timer Using the sleep timer
This function enables you to turn off the unit automatically
after the set time.
Press [SLEEP] to select your desired time.
SLEEP 30 SLEEP 60 SLEEP 90
SLEEP 120 SLEEP OFF
Sleep timer indicator
To cancel
Press [SLEEP] to select “SLEEP OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time and press
[SLEEP] again to select your desired time.
Note:
• The play and sleep timer or the record and sleep timer can be used
together.
• The sleep timer always has priority. Be sure not to overlap timer
settings.
• The sleep timer turns off when you perform the record function.
RQTV0066-B.indd 15 RQTV0066-B.indd 15 11/16/05 9:37:29 AM 11/16/05 9:37:29 AM