Planet Technology FGSW-2620VM - Manual (Page 51)

FGSW-2620VM User’s Manual
Query
A message sent from the querier (IGMP router or switch) asking for a response
from each host belonging to the multicast group.
Report
A message sent by a host to the querier to indicate that the host wants to be or is a
member of a given group indicated in the report message.
Leave Group
A message sent by a host to the querier to indicate that the host has quit to be a
member of a specific multicast group.
When you enable the IGMP Snooping, you will see the relate information show as following figure.
Figure 4-3-8 IGMP Snooping interface
OObject Description
IP Address Show the IP Address for IGMP.
VLAN ID Show the VLAN ID for IGMP.
Member Port Show the Member Port for IGMP.
IGMP Protocol Enable or disable IGMP Protocol.
IGMP Query Enable or disable IGMP Query.
4.3.4 Forwarding Table
You can configure forwarding table of every port, the screen in Figure 4-3-9.
51