Polycom VoiceStation 300 - Manual (Page 29)

KIRK Handset Registration
5–3
Click Save to save the registration(s).
For information on how to subscribe the KIRK Handsets, please refer to the
handset user guides at www.polycom.com.
Field Explanation Required Optional
Access
Code
Enter the authentication code (AC).
The authentication code is a subscription
password of a maximum of eight digits,
defined by the technicians, and can be used
when connecting the handset to a KWS300.
The authentication code is a subscription
pin code for the individual handset.
x
Standby
text
Enter a text to be displayed when the
handset is on hook.
x
User page - SIP
Username
Enter the user part of a SIP URI, e.g. 1234
in John Doe1234@somecompany.com
x
Domain
Enter the domain part of a SIP URI, e.g.
somecompany.com in John
Doesomecompany.com
Note: If not configured, the default
domain will be used.
x
Display
name
Enter the name to be displayed (caller ID),
e.g. John Doe in John Doe
[email protected]
x
Authen-
tication
user
Enter user name.
The user name will override the Default
User
field under SIP Configuration.
x
Authenti-
cation
password
Enter a password.
The password will override the Default
Password
field under SIP Configuration.
x
User Page - MSF
Local
Number
Enter local number of the handset.
Entering a local number makes it possible
to send an MSF to the subscribed handset.
Note:
Required for receiving MWI.
x
Table 5-1 Configuring KIRK Handsets