Polycom VoiceStation 300 - Manual (Page 20)

Configuring KIRK Wireless Server 300
4–3
For information on accessing the web based Administration Page, refer to
“How to Access the Administration Page” on page 4-1.
This section contains information about:
• “General Configuration” on page 4-3
• “Wireless Server Configuration” on page 4-4
• “SIP Configuration” on page 4-7
General Configuration
On the Configuration/General page you define IP, DNS and NTP settings for
the KWS300.
Click Configuration, and then click General.
Figure 4-2 Adm. Page KWS300: Configuration/General page
Note The KWS300 is pre-configured to use DHCP. If DHCP is not available, it
will fall back to static (192.168.0.1).
Prior to firmware release PCS05B_, by default, the KWS300 used static IP
address (192.168.0.1).
The current IP Address of the KWS300 can be discovered using UPnP.
Table 4-1 General Configuration of the KWS300
Field Explanation Required Optional
General Configuration - IP
Use Static IP
Address Enable the field. It is possible to configure a
KWS300 using DHCP.
x