Polycom VoiceStation 300 - Manual (Page 21)

Configuring KIRK Wireless Server 300
4–4
Click Save to save your general configuration data.
Wireless Server Configuration
On the Configuration/Wireless Server page you configure the KWS300 to
allow subscription. If the system does not allow subscription, it is not possible
to subscribe a handset.
Click Configuration, and then click Wireless Server.
Figure 4-3 Adm. Page KWS300: Configuration/Wireless Server page
Field Explanation Required Optional
IP Addr Enter the IP address of the KWS300 x
Netmask
Enter a new network mask. Contact you
system administrator for more information.
x
Gateway
Enter the IP address of the default gateway.
The default gateway serves as an access
point to another network. Contact your
system administrator for more information.
x
MTU
(Maximum
Translation
Unit)
Enter the size of the largest packet, that your
network protocol can transmit
x
General Configuration - DNS (Domain Name System)
Domain
Enter the name of the domain where system
belongs.
x
Primary
Server Enter the IP address of the Primary DNS
server
x
Secondary
Server Enter the IP address of the Secondary DNS
server
x
General Configuration - NTP (Network Time Protocol)
Server
Enter the address of the NTP server from
which the system will obtain the current time
x
Time Zone Select the time zone x
Table 4-1 General Configuration of the KWS300