0 connect the g.shdsl port, 0 additional information – Patton electronic DIAMONDLINK 3201 User Manual
Page 6
6
DiamondLink 3201 & 3241 Quick Start Guide
5.0 Connect the G.SHDSL port
1.
Obtain single-twisted-pair cable with an RJ-11 plug connector at each end.
2.
Plug one end of the cable into the RJ-11socket (yellow colored port labeled
LINE
)
on the
DiamondLink Router.
3.
Plug the other end of the cable into the RJ-11 wall socket that provides your G.SHDSL service.
4.
When a DSL link is established, the front panel
WAN Link
LED will turn on.
6.0 Additional Information
Refer to the
DiamondLink User Manual
located on the CD-ROM shipped with your Model 3201 or 3241 and
for detailed information about:
•
Installing, configuring, operating, and troubleshooting,
•
Warranty, trademark, & compliance
A.0 Customer and Technical Support
Toll-Free VoIP support: call
with a VoIP SIP phone
Online support: www
.patton.com
E-mail support:
—answered within 1 business day
Telephone support:
•
Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to
2200 UTC/GMT)
•
Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800
UTC/GMT)
Fax:
+1 (253) 663-5693
(USA)
or +41 (0)31 985 25 26 (
Switzerland)