Panasonic WV-NW502SK - Manual (Page 20)

20
Note:
• Only the same type of holes, A or B, shall be
used for mounting.
x
Pass the cables through the hole for cable running from the wall or ceiling.
c
Fix the camera attachment on the mount bracket using the screws supplied with
the bracket.
Recommended tightening torque: 0.78 N·m {0.58 lbf·ft}
Note:
• For wall mounting:
The camera attachment shall be mounted with "MTOP" facing upward. Except the case of
connecting the conduit upward (page 33)
• For ceiling mounting:
The camera attachment shall be mounted with aligning the front side (model number indi-
cation face) of the camera with the position of the arrow in “
• Ensure that any of the arrows on the mount bracket is aligned with the "MTOP" arrow on the
camera attachment.
B
B
B
B
A A
A A
FRON
T
TOP
Camera attachment