Philips 20PV230/07 - Manual (Page 15)

Selecting a TV channel
Select the required TV channel (= the programme number)
with the
;P q , =P r buttons or with the digit buttons
0..9 on the remote control.
D The connected decoder can only be used for one TV
programme. If you would like to switch to a different
TV channel which also requires the decoder during
recording, the following message will appear on the
screen: ’DECODER IN USE’.
Channel number of the scart socket
a Select the channel number ’E1’ using the button 0 on
the remote control.
Channel number of the sockets A/V on the
front
a Select channel number ’E1’ using the button 0 on the
remote control and then select channel number ’AV’
using the button
=P r .
b Use the number buttons 0..9 on the remote control to
select the channels on the TV-Video Combi.
Volume control
You can adjust the volume using the QSr , SqP
buttons on the remote control.
D If you would like to change the volume on the
machine, press the button P /S on the TV-Video
Combi and change the volume using the buttons
q or r .
D If you want to mute the sound temporarily (e.g.:
during a telephone call), press the MUTE y button
on the remote control. When you press the
MUTE y button again, the sound will return at its
original volume level.
D While the sound is turned off, ’y’ will appear on the
screen.
Picture settings
The picture can be adjusted according to your personal
preferences.
These settings are automatically stored after exiting the main
menu.
a Press the MENU button. The main menu appears.
b Confirm the line ’TV SETTINGS’ using the button
SqP .
TV SETTINGS
BRIGHTNESS W (,=,,$ X
COLOUR (,,=,$
CONTRAST
(,=,,$
SHARPNESS (,,=,$
START UP VOLUME (=,,,$
EXIT: MENU
c Select the desired line with the =P r or ;P q button
and modify the settings using the QSr or
SqP button.
D If you TV-Video Combi also has the function:
START UP VOLUME(Switch-on volume) , please
read more detailed information in the respective
section.
d To end, press the MENU button.
3. TV SET FUNCTIONS
11