Philips 20PV230/07 - Manual (Page 12)

b Select the line ’MANUAL SEARCH’ with the =P r or
;P q button and confirm with the SqP button.
MANUAL SEARCH
PROGRAMME NUMBER W P01 X
FREQUENCY 754
DECODER OFF
EXIT: MENU STORE: OK
c In the line ’PROGRAMME NUMBER’, select the function
with the buttons
QSr or SqP or use the
number buttons ’ 0..9 ’ on the remote control to select the
desired programme number, e.g.: ’P01’.
d Select the line ’FREQUENCY’ with the menu buttons
=P r or ;P q .
e Enter the frequency of the desired TV channel with the
number buttons
0..9 .
D If you don’t know the frequency of the desired TV
channel, press SqP in line ’FREQUENCY’ to
start the automatic search.
Repeat automatic search until you have found the
desired TV channel. A changing frequency number
will appear on the TV screen.
f If you want to allocate a decoder, in line ’DECODER’
select ’ON’ using the button
SqP .
g To store the TV channel, press OK . ’STORED’ will
briefly appear on the TV screen.
D If you would like to search for more TV channels,
start again at step b .
h To end, press the MENU button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket
EXT .
a To do this, select the channel number ’E1’ using the
button
0 on the remote control. You will have to select
the channels to be received by the satellite receiver on
the receiver itself.
b Use the number buttons 0..9 on the remote control to
select the channels on the TV-Video Combi.
Special installation functions
You can select one of the following installation functions in
order to adapt your TV-Video Combi to your own specific
requirements.
Automatic TV channel search (Autoinstall)
Your TV-Video Combi will search for all TV channels. It
arranges them in the following sequence into memory: BBC1,
BBC2, ITV, CH4, CH5, SKY, others.
D When you start this function, existing programmed
recordings may be deleted.
D If you want to start the automatic TV channel search
again, follow the instructions below.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’AUTO INSTALL’ with the menu buttons
=P r or ;P q .
8