Panasonic KX-L5CW - Manual (Page 10)

10
Automatic dialing on the main unit
Storing names and telephone
numbers in the phonebook Making a voice call using the
phonebook
1
Press (Phonebook) and (Register).
● “XXX” shows the number of remaining stations you
can store.
● You can program up to 150 stations, including 4
pre-programmed stations.
2
Press (Search button) repeatedly until the
desired name is displayed.
3
Enter the name, up to 20 characters (see the table on
page 9 for instructions), then press (Register).
3
Lift the handset or press (Speakerphone).
5
Enter the telephone number, up to 24 digits.
● To correct a mistake, press (Clear).
6
Press (Register).
7
If necessary, press (Down) and (Set),
then enter the group number (1–9).
8
Press (Register).
● To program other items, press (Next station)
and repeat steps 2 to 9.
Editing a stored name or number
2
Press (Search button) repeatedly until the
desired name is displayed.
3
Press (Edit).
4
Press (Set) and edit the name (see the table on
page 9 for instructions), then press (Register).
● If you do not need to edit the name, skip to step 5.
6
Press (Set) and enter the correct kana, then
press (Register).
9
If necessary, press (Search button) to
select the group number column.
● If you do not need to edit the group number,
skip to step 11.
10
Press (Set), and enter the group number
(1-9), then press (Register).
2
Press (Set).
1
Press (Phonebook).
1
Press (Phonebook).
5
Press (Search button) to select the kana
column.
● If you do not need to edit the kana, skip to step 7.
4
Press (Down) twice and (Set).
8
Press (Set) and enter the correct telephone
number, then press (Register).
7
Press (Search button) to select the
telephone number column.
● If you do not need to edit the telephone number,
skip to step 9.
11
Press (Stop) to exit the program.
9
Press (Stop) to exit the program.
Name
Kana
Group number
Telephone number