Primera Technology BRAVO 091211-511276 - Manual (Page 46)

42 Creating Discs
Change Cartridge(s)
Select the Change Cartridge(s) button to install a new ink
cartridge or to switch back and forth between previously used
cartridges.
Clean Print Head
If the printer has been idle for a long period of time you may
start to experience some drying of ink in the tiny nozzles that
make up the print head. Clicking the Clean Print Head button
will cause the Publisher to pick a disc and place in into the
printer tray. The Publisher will then print a simple pattern that
will flush ink through the nozzles. Multiple Clean Print Head
prints may be necessary! If the nozzles are not fully clear after
a few cleaning prints, it may be necessary to remove the car-
tridge and manually clean the print head. See Section 3D.
F. LABEL DESIGN REQUIREMENTS FOR OTHER
GRAPHICS PROGRAMS
Other graphics programs can be used to design labels and
print directly to the Publisher.
When printing and burning through the PTPublisher software
your Publisher will support the following additional stardard
label image file formats: BMP, TIF, JPG, GIF, PNG and PRN.
These formats can be exported from most original graphics
formats such as Adobe Photoshop or Illustrator.
When creating images in other graphics programs we
recommend creating a 4.72 x 4.72 square image that has a
300 dpi resolution.
511276.qxd 3/16/2012 11:04 AM Page 42
INDEX TOC