Primera Technology BRAVO 091211-511276 - Manual (Page 33)

Creating Discs 29
Note: You will receive 3 free protections before the dongle is connected. After
the free protections are used the PTProtect option is still visible but not
selectable.
B.8 Projects Sets (PC Disc Publishers Only)
A project set is a group of projects that you can save in specific
order and run once or multiple times. You should use this fea-
ture if you often run a group of projects together. For example,
you might package an audio disc and a DVD together as a set so
you would always need the same number of both. Just add both
projects to a project set and start them both with a single Go
command. Or if you package six discs together as a set you can
create a project for each volume, add them all to a set and click
Go to start them all. You can even collate by running the set
multiple times.
There are two ways to create a project set.
A. Add existing saved project to a new project set.
1. Go to Advanced Projects - Project Set
2. You will be prompted to name your project set.
3. The projects sets screen will appear.
4. Click Add Project to browse to an existing project.
5. Add additional projects sets in the same manner.
B. Add a currently open project to a new or existing project set.
1. Setup your project just as you normally would.
2. On the summary screen, save your project.
511276.qxd 3/16/2012 11:04 AM Page 29
INDEX TOC