Primera Technology BRAVO 091211-511276 - Manual (Page 14)

10 Getting Started
5. Place the new cartridge into its corresponding colored slot.
Press down near the back of the cartridge until it clicks into
position.
Important Note: Make sure the cartridge is securely in place. An
improperly positioned cartridge will cause no ink of that color
to be printed.
D. SETUP THE KIOSK BIN (NOT INCLUDED WITH
4051 MODELS)
Kiosk Mode allows you to use both of the Publisher's Bins as
input, doubling your disc capacity from 50 discs to 100 discs.
In this mode, the finished discs will be deposited through the
front " reject area " of the Publisher. In Kiosk mode all discs
would be ejected in this manner. Rejects can be identified in the
stack because they will not be printed. Refer to the following
Kiosk Kit installation instructions.
Click!
511276.qxd 3/16/2012 11:04 AM Page 10
INDEX TOC