Pandigital PI9001DW - Manual (Page 25)

25
Disconnect DPF from Macintosh Computer
1. To safely disconnect the DPF from your Macintosh, select DPF’s
icon on your desktop and press Command-e to eject the disk.
2. When the icon is no longer on the desktop, it is safe to unplug
the USB cable.
Set Sleep Mode
The DPF will stay on until you power it off, however, to save power you
can set it to automatically go into a sleep mode when left idle for a
specific amount of time.
1. On the HOME screen, press MENU to display the Setup Menu .
2. Select Set Sleep Mode , and then select the desired setting.
OFF (default) = Power saver is ‘disabled’; DPF will remain on until you power it off
or change the sleep mode setting
2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the
specified amount of time
3. Select Done .
4. Press EXIT to return to previous screen.
Set Language
Depending on model, this DPF may include multiple languages for the
user interface display.
1. On the HOME screen, press MENU to display the Setup Menu .
2. Select Set Language , and then select the desired language.
Reset to Factory Defaults
If you have changed function settings, using this feature will restore all
settings to the factory pre-set defaults.
1. On the HOME screen, press MENU to display the Setup Menu .