Philips Fisio 825 - Manual (Page 82)

80 WAP services
The three access settings available in this menu are the following:
- -
Each of these settings allows you to:
- Visualise all parameters of the selected WAP profile (Gateway IP
Address, Homepage address, phone number, etc.), either GSM or
GPRS,
- Activate the selected profile (which then becomes the default profile
and is used for connection when pressing
-
),
- Change the parameters of the WAP profiles as described below.
L
Some pre-configured profiles might be locked, preventing re-programming.
Change name
L
Allows you to enter or change the name of the selected WAP profile.
Press
,
, enter the name of your choice and press
,
to confirm.
GSM settings
Allows you to enter or change the GMS settings and gives you access to
the following items:
- - -
Login and Password allow you to enter the login and password needed. In
both cases, enter the information and press
,
to confirm.
Phone Number allows you to enter the phone number needed to
establish a connection with your WAP Service Provider (ISP). Select
Phone numbers and press
,
, then press
-
or
+
to select:
- ISDN No. to enter an ISDN ISP number, OR
- Analogic No. to enter an analogic number, then press
,
.
Enter the "+" sign followed by the number provided by your operator and
press
,
.
L
Contact your operator to know what type of number you should select.
Inactivity time allows you to enter an inactivity time period after which
the phone automatically ends the WAP session (if a connection was in
progress) and returns to idle screen. Select
Inactivity time and press
,
,
then enter a value (in second) of over 30 s. and press
,
.
Access settings
Show Activate Change
Change name
GSM settings
Login Password Phone number Inactivity time
Fisio825_GB_4311 255 53812.book Page 80 Vendredi, 18. octobre 2002 9:45 09