Philips Fisio 825 - Manual (Page 74)

72 Bluetooth
features
3 The list of devices and accessories detected by the mobile phone appears,
including a name (e.g., "Philips") and a Bluetooth address (unique identifier
made of letters and digits). Press
2
or
8
to select the headset of
your choice, then press
,
.
4 Enter the Pairing code (also called "PIN code" or "Bluetooth passkey")
supplied with your headset, then press
+
.
5 Once the mobile has found the headset, it displays its name and address.
Press
,
to store this information: your headset is ready for use with
your mobile phone.
Change nickname and view Bluetooth ID
These two menus allow to respectively change the nickname of your mobile
phone (e.g. enter "My mobile" instead of "Fisio 825" which is the default name)
and view its Bluetooth ID.
Change or delete a profile used
1 Select Bluetooth , Bluetooth Setting, Bluetooth Headset , and press
,
.
2 Select the current headset profile in the list, then press
,
.
3 Select Change to change the current profile, or Delete to set a new
profile (e.g. to use another headset). Then press
,
to confirm your
choice and proceed with configuration and authentification as described
above.
L
Your mobile can only store one audio profile at a time: if you delete the one
available, you must define a new profile by reconfiguring a headset (see “Pair and
use a PC or PDA” page 74).
Manage calls
All operations described below imply that the Bluetooth stand-by duration time
is set to any value except
Off , and that both your mobile and your headset are
switched on.
Also note that your mobile phone doesn’t manage resource sharing: if you are
using your mobile to transfer data to/from your PC or PDA, you won’t be able
to place a call until you have completed the data transfer.
Change Nickname
View Bluetooth ID
BT Headset
Fisio825_GB_4311 255 53812.book Page 72 Vendredi, 18. octobre 2002 9:45 09