Philips Fisio 825 - Manual (Page 63)

61 E-mail
As shown below, two types of settings must be configured before using
the e-mail feature: the settings you get from your operator, needed to connect
to the network (see “Network access”), and the ones you get from the e-mail
service provider to connect to his server (see “E-mail server access”).
Your phone might have been pre-configured. In this case, most
parameters are already set and you don’t have to change them
(except for
Login , Password and E-mail address which are up to you when
creating an e-mail account).
L
In some cases, your operator might also be your e-mail service provider.
Settings
Network access
This menu allows you to configure your phone and to handle the connection to
the network, whether GSM or GPRS, in order to then connect to the
appropriate server that will let you send and receive e-mails.
L
All options described below are operator and/or subscription dependent.
Network access
Info usually provided
by GSM operator
E-mail server
Info provided by
Service provider
Advanced
Info provided by
Service provider
Internet network
E-mail access via GSM or GPRS
Telephone network
GSM or GPRS connection
See “Bearer” page 62,
“GSM settings” page 63
and “GPRS settings”
page 62.
See “E-mail server
access” page 63 See “Advanced”
page 64
Fisio825_GB_4311 255 53812.book Page 61 Vendredi, 18. octobre 2002 9:45 09