Advanced – Philips Fisio 825 User Manual
Page 66
64
2
Select
E-Mail server
and press
,
.
The fields to be completed are the following:
-
-
-
-
The
POP3 address
field allows you to enter the IP or DSN address of the POP3
server, which is used to receive e-mails.
The
SMTP address
field allows you to enter the IP or DSN address of the POP3
server, which is used to send e-mails.
L
Network-dependent! For an e-mail connection via GPRS, if your
phone operator is not your e-mail provider, contact your operator to
get the correct address of his SMTP server and enter it in this field.
In some cases,
Login
,
Password
and
E-mail address
are up to you when you
subscribe to your account. Enter them also as defined.
Advanced
The menus described in this section feature advanced settings that may have
been pre-configured, so that you shouldn’t have to change any of them.
L
If the fields of these menus are empty, or if you encounter connection problems,
contact your ISP.
The fields of this menu are the following:
-
-
-
POP3 port
field allows you to enter the POP3 port number, which is used to
receive e-mails, and the
SMTP port
field allows you to enter the SMTP port
number, which is used to send e-mails.
The
DNS address
field allows you to enter the DNS address of the external
data network you want to connect to. The
SMPT authentication
item allows
you to activate/deactivate the authentication process with the SMTP server.
L
In most European countries, this menu should be set to
Off
: your e-mails will
NOT be sent if set to
On
. Contact your provider for complete information.
POP3 address
SMTP Address
Login
Password
EMail address
Port POP3
Port SMTP
DNS address
SMTP Authenticat.
Fisio825_GB_4311 255 53812.book Page 64 Vendredi, 18. octobre 2002 9:45 09