Panasonic KX-FP181E - Manual (Page 86)

84
Ink Film
4 Remove the stoppers and tags from the new
ink film. Find the “T” shaped gear (blue).
Tags
New ink film
“T” shaped gear (blue)
Stopper
Stopper
5 Insert the blue core of the front ink film roll
into the right slot of the unit (
). Insert the
“T” shaped gear (blue) into the left slot of the
unit (
).
Insert the back ink film roll ( ). 3
2
1
2
Right
slot
Blue core
1
3
“T” shaped
gear (blue)
Left
slot
Back ink film roll
Front ink
film roll
6 If the ink film is slack, tighten it by winding
the gear.
Gear
Ink film
Note:
● The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
Incorrect Correct
Tight
7 Close the back cover securely by pushing
down on the dotted area at both ends (
).
Close the front cover securely ( ).
● The following message will be displayed
while the unit is checking that there is no
slack on the ink film.
Display: PLEASE WAIT
2
1
Dotted area
Front cover
Display
Back cover
1
2