Panasonic KX-FP181E - Manual (Page 67)

Features Summary
65
If you are using the unit with an
answering machine, set the ring
count to more than 5.
Basic features !
Programming table
Code
#01
To set the date and time
SET DATE & TIME
dd/mm/yy
hh:mm
(2 digits for
each entry)
See page 13 for details.
See pages 14 and 15 for details.
See page 16 for details.
“ERROR”: The sending report will
be printed only when fax
transmission fails.
“ON”: The sending report will be
printed after every transmission.
#02
To set your logo
YOUR LOGO (Up to 30
characters)
Display & Feature Settings How the unit operates
#03
To set your facsimile telephone
number
YOUR FAX NO.
(Up to 20
digits)
#04
To print and check the sending
report for fax transmission results
(p. 32)
SENDING REPORT ERROR
ON
OFF
#06
■ For KX-FP181 only
To change the number of rings
before the unit answers a call in the
FAX ONLY mode
FAX RING COUNT
1, 2, 3, 4, 5,
6, 7, 8, 9
(The default setting is in bold type.) (continued)
This setting can be changed when
the unit is in FAX ONLY mode.
#06
■ For KX-FP185 only
To change the number of rings
before the unit answers a call in the
FAX ONLY mode
FAX RING COUNT
1, 2, 3, 4, 5,
6, 7, 8, 9
■ For KX-FP185 only
To change the number of rings
before the unit answers a call in the
TAD/FAX mode
TAD RING COUNT
1, 2, 3, 4
TOLL SAVER
RINGER OFF
“VOX”: Unlimited
“1–9”: 1 minute to 9 minutes
VOX
1, 2, 3, 4, 5,
6, 7, 8, 9
#10
■ For KX-FP185 only
To change the recording time for an
incoming message
RECORDING TIME
This setting can be changed when
the unit is in TAD/FAX mode.
● See page 52 for details.