Operations, Receive mode, Fax – receiving (cont.) – Panasonic KX-FP181E User Manual
Page 79: Copying
77
Operations
Receive mode
Problem
●
If you want to set the FAX ONLY, TEL/FAX or TAD/FAX
(KX-FP185 only) mode:
— Select the desired mode using feature #77 (p. 71), and
— Press
to turn on the arrow (
▼
) on
the right of the display.
Display:
ON
●
If you want to set the TEL mode:
— Press
to turn off the arrow (
▼
) on
the right of the display.
ON
●
The unit is not in AUTO ANSWER mode. Press
to turn on the arrow (
▼
) on the right of
the display.
ON
▼
AUTO ANSWER
AUTO ANSWER
▼
AUTO ANSWER
Cause & Remedy
I cannot select the desired
receive mode.
The other party complains that
they cannot send a document.
Fax – receiving (cont.)
Problem
●
The other party sent a faint document. Ask them to send a
clearer copy of the document.
●
The thermal head is dirty. Clean it (p. 82).
●
Some paper has instructions recommending which side to
print on. Try turning the paper over.
●
Check the document of the other party.
●
If a blank sheet is ejected after the received document is
printed out, the receiving reduction rate is not
programmed correctly. Program the proper rate in feature
#36 (p. 68).
●
The other party placed the document in their fax machine
the wrong way. Check with the other party.
Cause & Remedy
The recording image is faint.
The printing quality is poor.
A blank sheet is ejected.
(continued)
Copying
Problem
●
You cannot make a copy during programming. Make the
copy after programming or stop the programming.
●
The glass or rollers are dirty. Clean them (p. 82).
●
The thermal head is dirty. Clean it (p. 82).
Cause & Remedy
The unit does not make a copy.
A dirty pattern or a black line
appears on the copied
document.
The copied image is distorted.